Three expansion chambers provide up to 45% measured reduction in felt recoil. Triple baffle, exhaust slots redirect noise and muzzle blast away from the shooter. Gives high volume shooters a quiet sounding brake that's easy to clean. Closed bottom keeps exiting gas from blowing up dirt and debris. Tapered shank for easier fitting to different barrel diameters. Adds 1-1/4" to barrel length. Comes with a thread protector.
SPECS: 4340 chrome moly steel. Blue (BL) or 17-4 stainless steel (SS), matte finish. 2" (5cm) long, .850" (22mm) dia. BL ¾"-28; 975" (24.7mm) dia, SS ¾"-28; 9.80 (24.8mm) dia. Hardened to Rc 42. .250 dia. exit hole, must be drilled out for calibers above .223. Requires threading and indexing of barrel. Instructions included.
Mehr...
Drei Expansionskammern sorgen für eine bis zu 45% ige Reduzierung des Filzrückschlags. Dreifache Schallwand, Auspuffschlitze leiten Geräusche um und die Mündung schiesst vom Schützen weg. Verleiht Schützen mit hoher Lautstärke eine leise klingende Bremse, die leicht zu reinigen ist. Geschlossener Boden hält austretendes Gas davon ab, Schmutz und Trümmer aufzublasen. Konischer Schaft zum leichteren Anpassen an verschiedene Laufdurchmesser. Fügt 1-1 / 4 "zur Lauflänge hinzu. Wird mit einem Gewindeschutz geliefert.
HINWEIS: Bei Kalibern über 223 muss die Mündungsbremse aufgebohrt werden.
TECHNISCHE DATEN: 4340 Chrom-Moly-Stahl. Blau (BL) oder 17-4 Edelstahl (SS), mattes Finish. 5 cm lang, 22 mm Durchmesser BL "-28; 975" (24,7 mm) Durchmesser, SS "-28; 9,80 (24,8 mm) Durchmesser. Auf Rc 42 gehärtet Indexierung des Laufs. Anleitung liegt bei.
Mehr...
Kundenbewertungen zu HOLLANDS GUNSMITHING QUICK DISCHARGE BRAKE 30 CALIBER 9/16-28 SS SILVER
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4
Great Break that works(23.11.2010)
I had it fit to a .338 Remington Ultra Mag.
Recoil before the the brake after 5-7 shos with a large soft pad and a Shoulder protector was uncomforatable and consintration was difficult.
With the brake; Shooting Federal 210 gr at over 3000 ft/second, It was as comfortable as my 25-06 with 120 gr. I fired 18 rounds in a row with it and could have shot a lot more.
The Noise didn't seem any more than it was before. Maybe less, fired between walls at a range.
A Great Product that WORKS.
Great Brake(10.08.2011)
Brake is effective and one of the only "open" designs allowing easy cleaning if snow/garbage gets into it. Just wish they sold a thread protector, but nothing a few minutes on a lathe won't correct.
METAL TOO HARD(11.02.2015)
We tore up everything in the gunsmith shop trying to drill this out to .360 for .338 Ultra. Somehow this Stainless Steel was significantly hardened by over heating etc.
Great brake(17.10.2009)
I have installed a number of brakes over the years and this dude is by far the most effective unit I have ever used. Tames '06 to a light 243. The only brake I stock. I have a shop gun with one installed to "sell" them. The only one I recommend.
Artikel-Nr.: 403000021 HOLLANDS GUNSMITHING QUICK DISCHARGE BRAKE 30 CALIBER 9/16-28 SS SILVER Herstellerproduktnummer: NONE Drei Expansionskammern sorgen für eine bis zu 45% ige Reduzierung des Filzrückschlags. Dreifache Schallwand, Auspuffschlitze leiten Geräusche um und die Mündung schiesst vom Schützen weg. Verleiht Schützen mit hoher Lautstärke eine leise klingende Bremse, die leicht zu reinigen ist. Geschlossener Boden hält austretendes Gas davon ab, Schmutz und Trümmer aufzublasen. Konischer Schaft zum leichteren Anpassen an verschiedene Laufdurchmesser. Fügt 1-1 / 4 "zur Lauflänge hinzu. Wird mit einem Gewindeschutz geliefert.
189.9CHF0CHF 189.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 403000009 HOLLANDS GUNSMITHING QUICK DISCHARGE BRAKE 30 CALIBER 9/16-28 SS BLUED Herstellerproduktnummer: NONE Drei Expansionskammern sorgen für eine bis zu 45% ige Reduzierung des Filzrückschlags. Dreifache Schallwand, Auspuffschlitze leiten Geräusche um und die Mündung schiesst vom Schützen weg. Verleiht Schützen mit hoher Lautstärke eine leise klingende Bremse, die leicht zu reinigen ist. Geschlossener Boden hält austretendes Gas davon ab, Schmutz und Trümmer aufzublasen. Konischer Schaft zum leichteren Anpassen an verschiedene Laufdurchmesser. Fügt 1-1 / 4 "zur Lauflänge hinzu. Wird mit einem Gewindeschutz geliefert.
Three expansion chambers provide up to 45% measured reduction in felt recoil. Triple baffle, exhaust slots redirect noise and muzzle blast away from the shooter. Gives high volume shooters a quiet sounding brake that's easy to clean. Closed bottom keeps exiting gas from blowing up dirt and debris. Tapered shank for easier fitting to different barrel diameters. Adds 1-1/4" to barrel length. Comes with a thread protector.
SPECS: 4340 chrome moly steel. Blue (BL) or 17-4 stainless steel (SS), matte finish. 2" (5cm) long, .850" (22mm) dia. BL ¾"-28; 975" (24.7mm) dia, SS ¾"-28; 9.80 (24.8mm) dia. Hardened to Rc 42. .250 dia. exit hole, must be drilled out for calibers above .223. Requires threading and indexing of barrel. Instructions included.
Mehr...
Drei Expansionskammern sorgen für eine bis zu 45% ige Reduzierung des Filzrückschlags. Dreifache Schallwand, Auspuffschlitze leiten Geräusche um und die Mündung schiesst vom Schützen weg. Verleiht Schützen mit hoher Lautstärke eine leise klingende Bremse, die leicht zu reinigen ist. Geschlossener Boden hält austretendes Gas davon ab, Schmutz und Trümmer aufzublasen. Konischer Schaft zum leichteren Anpassen an verschiedene Laufdurchmesser. Fügt 1-1 / 4 "zur Lauflänge hinzu. Wird mit einem Gewindeschutz geliefert.
HINWEIS: Bei Kalibern über 223 muss die Mündungsbremse aufgebohrt werden.
TECHNISCHE DATEN: 4340 Chrom-Moly-Stahl. Blau (BL) oder 17-4 Edelstahl (SS), mattes Finish. 5 cm lang, 22 mm Durchmesser BL "-28; 975" (24,7 mm) Durchmesser, SS "-28; 9,80 (24,8 mm) Durchmesser. Auf Rc 42 gehärtet Indexierung des Laufs. Anleitung liegt bei.
Mehr...
Kundenbewertungen zu HOLLANDS GUNSMITHING QUICK DISCHARGE BRAKE 30 CALIBER 9/16-28 SS SILVER
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4
Great Break that works(23.11.2010)
I had it fit to a .338 Remington Ultra Mag.
Recoil before the the brake after 5-7 shos with a large soft pad and a Shoulder protector was uncomforatable and consintration was difficult.
With the brake; Shooting Federal 210 gr at over 3000 ft/second, It was as comfortable as my 25-06 with 120 gr. I fired 18 rounds in a row with it and could have shot a lot more.
The Noise didn't seem any more than it was before. Maybe less, fired between walls at a range.
A Great Product that WORKS.
Great Brake(10.08.2011)
Brake is effective and one of the only "open" designs allowing easy cleaning if snow/garbage gets into it. Just wish they sold a thread protector, but nothing a few minutes on a lathe won't correct.
METAL TOO HARD(11.02.2015)
We tore up everything in the gunsmith shop trying to drill this out to .360 for .338 Ultra. Somehow this Stainless Steel was significantly hardened by over heating etc.
Great brake(17.10.2009)
I have installed a number of brakes over the years and this dude is by far the most effective unit I have ever used. Tames '06 to a light 243. The only brake I stock. I have a shop gun with one installed to "sell" them. The only one I recommend.