Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Montaggio di alta qualità per il tuo Trijicon RMR su Glock®
Il montaggio TRIJICON RMR SIGHT MOUNT PER GLOCK® è progettato per offrire una soluzione semplice e sicura per l'installazione del tuo red dot Trijicon RMR.
Descrizione del prodotto
- Materiale: Alluminio 7075
- Rivestimento: Matte Black Hardcoat
- Dimensioni complessive: Lunghezza: 1.780", Larghezza: 1.1"
- Hardware di montaggio: (2) Viti a testa piatta 6-32, (1) Vite di bloccaggio 6-32 X 3/16
- Compatibilità del red dot: Trijicon RMR, Holosun HS507C
- Nota: Questo montaggio non è compatibile con le Rock Island 1911s
Per installare il tuo Trijicon RMR, rimuovi semplicemente la vista posteriore dalla tua pistola e sostituiscila con il nostro montaggio. Non sono necessarie modifiche, e puoi rimuovere il montaggio e ripristinare la tua vista posteriore in qualsiasi momento.
Istruzioni per l'installazione
- Rimuovere la vista posteriore*
- Installare il montaggio EGW nella slitta
- Serrare la vite di bloccaggio (se applicabile)
- Posizionare il red dot sul montaggio EGW (mettere un piccolo pezzo di carta tra il red dot e il montaggio faciliterà la rimozione e manterrà il Loctite lontano dal red dot)
- Applicare Loctite blu sulle viti di montaggio fornite
- Serrare le viti di montaggio a 15in/lbs
Nota: Le viti incluse con questo montaggio richiedono una chiave a brugola da 5/64'' per l'installazione.