The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35 degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45 degree position provides additional clearance around wider turrets or larger, higher magnification scopes. The Arisaka Offset Optic Mount is designed to be attached to the top Picatinny rail of an AR15 rifle. When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height. The base and optic plates can be reversed, allowing for use on the left or right side. The base and plates can each be purchased separately or as a combination, providing an upgrade path in the future as users acquire new red dot sights. Weight: 1.9 oz without optic. Length: 1.0" for the base, which occupies three Picatinny slots (twin recoil lugs and clamping screw). Height: The base sits 0.180" above the surface of the Picatinny rail. The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. IP20 and IP27 Torx Plus bit drivers are included with each base. Standard height (for 1.5" to 1.8" scope mounts): Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 6: Aimpoint Acro Tall height (1.9" to 2.2" scope mounts): Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 12: Aimpoint Acro
Mountaggio ottico offset per una precisione senza pari
Il montaggio ottico offset Arisaka, in attesa di brevetto, è una soluzione modulare che consente all'utente di selezionare una posizione offset di 35 o 45 gradi per un mirino red dot senza necessitare di componenti aggiuntivi. La posizione a 35 gradi avvicina il mirino red dot a ottiche più sottili e compatte, mentre la posizione a 45 gradi offre maggiore spazio attorno a torrette più larghe o ottiche di ingrandimento maggiore.
Caratteristiche principali
- Progettato per essere attaccato al rail Picatinny superiore di un fucile AR15.
- Quando il fucile è inclinato per utilizzare il mirino red dot offset, l'ottica rimane centrata sopra il cannone e mantiene un'altezza di co-witness di 1/3 inferiore.
- La base e le piastre possono essere invertite, consentendo l'uso sul lato sinistro o destro.
- Base e piastre possono essere acquistate separatamente o come combinazione, offrendo un percorso di aggiornamento futuro man mano che gli utenti acquisiscono nuovi mirini red dot.
Dati Tecnici
Peso: 1.9 oz senza ottica.
Lunghezza: 1.0" per la base, che occupa tre slot Picatinny (doppie linguette di rinculo e vite di serraggio).
Altezza: La base si trova a 0.180" sopra la superficie del rail Picatinny.
Il montaggio è realizzato in alluminio 6061-T6 lavorato CNC e anodizzato con rivestimento duro MIL-A-8625 Tipo III. Gli strumenti Torx Plus IP20 e IP27 sono inclusi con ogni base.
Piastre Standard (per montaggi da 1.5" a 1.8")
- Placca 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Placca 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Placca 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Placca 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (non 5X), Holosun HS403 (non A), HS503, HS515, HS530
- Placca 6: Aimpoint Acro
Piastre Alte (per montaggi da 1.9" a 2.2")
- Placca 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Placca 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
- Placca 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Placca 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (non 5X), Holosun HS403 (non A), HS503, HS515, HS530
- Placca 12: Aimpoint Acro