HUNT SCOPE RINGS Given the success of their MATCH and TACTICAL scope mounts, Area 419 knew what the HUNT rings needed to be. Light, rigid, and able to hold onto an optic in a dramatic recoiling environment. To do this was no small manufacturing task. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made. Like most rings, these begin as separate parts. Area 419 are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, Area 419 produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in their world-class machining centers. Rings are then brought off the machine in sets, and packaged together so you know that your rings were made for one another, and you can rely on them for decades. Is it overkill? Probably. But Area 419 think it’s the right way. So that’s what Area 419 are going to do. NOTE: TO KEEP THE SIZE AND WEIGHT OF THESE RINGS TO A MINIMUM, THERE ARE NO ACCESSORY ATTACHMENT POINTS ON THESE RINGS. IF YOU WANT TO BE ABLE TO ADD ACCESSORIES TO YOUR RINGS, PLEASE CHECK OUT THEIR MATCH OR TACTICAL OFFERINGS. Specifications: Material: 7075 Aerospace Grade Billet Aluminum (with Stainless Steel Hardware) Coating: Type 3 Hardcoat Anodize (internal bore is raw aluminum) Weight: 4 oz/set (30mm Medium)
Scopri gli anelli per mirini HUNT di AREA 419, progettati per prestazioni superiori.
I HUNT SCOPE RINGS di AREA 419 rappresentano l'evoluzione necessaria per gli appassionati di tiro. Dopo il successo dei loro supporti per mirini MATCH e TACTICAL, AREA 419 ha capito cosa serviva agli anelli HUNT: leggerezza, rigidità e la capacità di mantenere un'ottica anche in ambienti di rinculo drammatico.
Processo di produzione unico
Non è stato un compito semplice. Siamo scesi in un tunnel di ricerca, arrivando a un processo che garantisce anelli abbinati al foro finale, con interni in alluminio grezzo, per una presa sull'ottica più affidabile e precisa di qualsiasi altro prodotto sul mercato.
Assemblaggio e precisione
Come la maggior parte degli anelli, questi iniziano come parti separate. AREA 419 produce le basi e i coperchi in lotti. Mentre molti produttori realizzano queste parti, le inviano all'anodizzazione e poi semplicemente le assemblano, AREA 419 si dedica a passaggi extra. Una volta che queste parti tornano dall'anodizzazione, vengono completamente assemblate, reinserite in apposite strutture di supporto, con i coperchi serrati secondo le specifiche su spessori appositamente realizzati (per dare spazio agli anelli per serrarsi sull'ottica) e forati finali come set nei loro centri di lavorazione di classe mondiale.
Affidabilità per decenni
Gli anelli vengono poi rimossi dalla macchina in set e confezionati insieme, così saprai che i tuoi anelli sono stati realizzati l'uno per l'altro, e potrai fare affidamento su di essi per decenni.
Overkill? Probabilmente.
Ma AREA 419 pensa che sia il modo giusto di procedere. Ecco perché AREA 419 seguirà questa strada.
Nota Importante
PER MANTENERE LE DIMENSIONI E IL PESO DI QUESTI ANELLI AL MINIMO, NON CI SONO PUNTI DI ATTACCO PER ACCESSORI SU QUESTI ANELLI. SE DESIDERI AGGIUNGERE ACCESSORI AI TUOI ANELLI, CONTROLLA LE LORO OFFERTE MATCH O TACTICAL.
Specifiche:
- Materiale: Alluminio Billet di Grado Aerospaziale 7075 (con hardware in acciaio inossidabile)
- Rivestimento: Anodizzazione Hardcoat Tipo 3 (il foro interno è in alluminio grezzo)
- Peso: 4 oz/set (30mm Medio)