Brownells Svizzera - Il più grande rivenditore di componenti e accessori per armi ed attrezzistica per armieri Suisse / Schweiz

BROWNELLS
CROWN SAVER™ LATHE CENTER COVER

080000379
Your Safeguard When Turning Barrels With Finished Crowns
These brass cones take much of the anxiety out of lathe-turning a perfectly good barrel with an already finished crown. Insert a Crown Saver between the muzzle and lathe or mill center before fluting, chambering, polishing, or threading for a muzzle brake, and you can rest assured you won’t harm the rifling or ding the crown. Each brass cone is machined to within .0002" or less concentricity, making using a Crown Saver as accurate as direct barrel contact against the center. With a Crown Saver, you virtually eliminate any chance of swaging the rifling. It stays seated and will not spin in the bore when the barrel is chucked in the lathe. Small fits bores .17 to .45 caliber. Large fits bores up to .50 caliber. For best results, do not use Crown Saver more than once on barrels of the same caliber.

SPECS: 360 brass. Maximum diameter. Small - .500", Large - .750".

48.9 48.9 1 CHF
N. prodotto: 080000379
BROWNELLS CROWN SAVER LATHE CENTER COVER SMALL 10 PACK
Parti Fabbricante: 080000379 Questi coni in ottone prendono molto dell'ansia fuori un barile perfettamente bene con una corona già finito di tornitura tornio. Inserire un risparmiatore corona tra il muso e tornio o mulino centro prima fluting, chambering, lucidatura o filettare per un freno di bocca, e potete stare certi che voi non danneggiare la rigatura o ding la corona. Ogni cono di ottone è lavorata a entro. 0002" o meno concentricità, fare utilizzando una corona Saver esatte come canna diretto contatto contro il centro. Con un risparmio di corona, è virtualmente eliminare qualsiasi possibilità di foggiare la rigatura. Rimane seduto e non girerà nel foro quando la canna è buttata nel tornio. Si inserisce piccoli fori.17 a,45 calibro. Large si adatta fori fino a calibro 50. Per risultati ottimali, non utilizzare Saver corona più di una volta su botti dello stesso calibro.
48.9 CHF 0 CHF 48.90 *
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.

Caratteristiche

Peso della spedizione: 0.045kg Larghezza di spedizione: 83mm Lunghezza di spedizione: 146mm

Dettagli dell'elemento

Made in Usa



Your Safeguard When Turning Barrels With Finished Crowns
These brass cones take much of the anxiety out of lathe-turning a perfectly good barrel with an already finished crown. Insert a Crown Saver between the muzzle and lathe or mill center before fluting, chambering, polishing, or threading for a muzzle brake, and you can rest assured you won’t harm the rifling or ding the crown. Each brass cone is machined to within .0002" or less concentricity, making using a Crown Saver as accurate as direct barrel contact against the center. With a Crown Saver, you virtually eliminate any chance of swaging the rifling. It stays seated and will not spin in the bore when the barrel is chucked in the lathe. Small fits bores .17 to .45 caliber. Large fits bores up to .50 caliber. For best results, do not use Crown Saver more than once on barrels of the same caliber.

SPECS: 360 brass. Maximum diameter. Small - .500", Large - .750".

Newsletter