Brownells Shotgun Sight Kit “B” is the most important improvement in the replacement shotgun sight field since the introduc-tion of the original Brownells Shotgun Sight Kit nearly 20 years ago. The new Kit is truly the natural and logical companion to the original Kit “A” - giving you, the gunsmithing or sports shop, all the sights that Kit “A” doesn’t contain, but that you need to have a really versatile and complete replacement shotgun sight inventory in just 2 small boxes. Plus, in Kit “B”, we took the practical step of making the White beads out of stainless steel. Stainless is stronger, won’t crush or distort when the beads are installed, does not have to be removed when the gun goes into the hot bluing solution (and won’t dissolve and ruin your bluing bath once it’s in there)!! Plus, the stainless won’t break off at the top of the shank, stays shiny forever, stands up to tougher use in the field, and generally is one whale of a lot better sight.But, the real advantage of Kit “B” is that by combining it with Kit “A”, you can now have a selection of shank sizes unequaled among shotgun sights. So, if you get a gun in your shop with a badly misshapen, worn or stripped-out sight hole, you will have a bead of exactly the same size, but with a shank one size larger. Replacement is then just a simple matter of drilling out the hole to the next size larger, tapping, and inserting the new bead. The most important thing is that the Kit saves you time, giving faster work turnaround in the shop, which makes you more money. It also eliminates “patching-up” the original hole (which often then requires repairing the blue, too) and redrilling and tapping for the original size shank. And, it gets your customer back in the field sooner which makes him happy, and makes you look good! Like the original Kit “A”, the workmanship is superb, the sight globes are true spheres, the threads are cut onto the shank, so they are clean, sharp, and give the best possible fit. And, they are threaded right up to the base of the bead so you can set the sight exactly onto the barrel.Thread sizes are 6-48 and 8-40; certainly two of the most common and popular thread sizes in the gun industry, so everyone has the necessary drills and taps. The bead sizes are .067, .130 and .175, again the most popular sizes, and the same as those used in Kit “A”.The Gold beads are machined from finest brass; the White beads from tough stainless steel. Because these are solid metal beads, they cannot bleed, chip, peel or have the color wear off.As the companion to Kit “A”, Kit “B” also comes in a clear plastic counter case. Each individual sight number is in its own clearly identified box on a black tray. There are 10 sights of each number, giving you a total of 80 new sights. By itself, a complete inventory of 3 very popular sizes in 2 colors, with 6-48 and 8-40 shanks; but as a companion to Kit “A”, an unbeatable assortment of the most versatile and useful shotgun sight beads available anywhere. And, right at your fingertips, ready to install for your customers. Order your Brownells Shotgun Sight Kit “B” today.Refill Sights for Kit "B" - Refills for the Shotgun Sight Kit “B” are single or 10-pak of sights of one number.
SPECS: Brass and Stainless Steel Beads in 3½" (8.9cm) x 7" (17.9cm) clear plastic box.
Other Shotgun Sight Kits:
SHOTGUN SIGHT KIT "B" CONTAINS: | NO. | HEAD DIA. | SHAFT/ THREAD | DRILL/TAP SIZE | COLOR |
| 21 | .067" | 6-48 | No. 31-6-48 | Gold |
| 22 | .130" | 6-48 | No. 31-6-48 | Gold |
| 23 | .130" | 8-40 | No. 28-8-40 | Gold |
| 24 | .175" | 8-40 | No. 28-8-40 | Gold |
| 25 | .067" | 6-48 | No. 31-6-48 | White |
| 26 | .130" | 6-48 | No. 31-6-48 | White |
| 27 | .130" | 8-40 | No. 28-8-40 | White |
| 28 | .175" | 8-40 | No. 28-8-40 | White |
Scopri il Kit di Mirini per Fucile \"B\" di Brownells!
Il Kit di Mirini per Fucile \"B\" di Brownells rappresenta un miglioramento fondamentale nel campo dei mirini di ricambio per fucili, dal lancio del Kit originale di Brownells quasi 20 anni fa. Questo nuovo kit è il compagno naturale e logico del Kit originale \"A\", offrendoti, come armeria o negozio sportivo, tutti i mirini che il Kit \"A\" non contiene, ma di cui hai bisogno per avere un inventario di mirini di ricambio per fucili veramente versatile e completo, tutto in sole 2 piccole scatole.
Inoltre, nel Kit \"B\", abbiamo fatto il passo pratico di realizzare i mirini bianchi in acciaio inossidabile. L'acciaio inossidabile è più resistente, non si schiaccia o si deforma quando i mirini vengono installati e non deve essere rimosso quando l'arma viene immersa nella soluzione di bluatura calda (e non si scioglie e rovina il tuo bagno di bluatura una volta dentro)!! Inoltre, l'acciaio inossidabile non si rompe nella parte superiore del gambo, rimane lucido per sempre, resiste a un uso più intenso sul campo e, in generale, è un mirino di gran lunga migliore.
Il vero vantaggio del Kit \"B\" è che, combinandolo con il Kit \"A\", ora puoi avere una selezione di dimensioni dei gambi senza pari tra i mirini per fucile. Quindi, se ricevi un'arma nel tuo negozio con un foro per mirino deformato, usurato o danneggiato, avrai un mirino della stessa dimensione, ma con un gambo di una dimensione maggiore. La sostituzione è quindi una semplice questione di allargare il foro alla dimensione successiva, filettare e inserire il nuovo mirino.
La cosa più importante è che il Kit ti fa risparmiare tempo, offrendo un turnaround di lavoro più veloce nel negozio, il che ti fa guadagnare di più. Inoltre, elimina il dover \"riparare\" il foro originale (che spesso richiede anche di riparare la bluatura) e di rifilettare per il gambo della dimensione originale. E, fa tornare il tuo cliente sul campo più velocemente, il che lo rende felice e ti fa apparire bene!
Come il Kit originale \"A\", la lavorazione è superba, le sfere dei mirini sono veri globi, i filetti sono tagliati sul gambo, quindi sono puliti, affilati e offrono la migliore vestibilità possibile. Inoltre, sono filettati fino alla base del mirino, così puoi posizionare il mirino esattamente sul barile.
- Dimensioni dei filetti: 6-48 e 8-40; certamente due delle dimensioni di filetto più comuni e popolari nel settore delle armi, così tutti hanno i trapani e i filetti necessari.
- Dimensioni dei mirini: .067, .130 e .175, ancora una volta le dimensioni più popolari, e le stesse di quelle utilizzate nel Kit \"A\".
I mirini dorati sono lavorati in ottone di alta qualità; i mirini bianchi in acciaio inossidabile resistente. Poiché questi sono mirini in metallo solido, non possono sbiadire, scheggiarsi, sfaldarsi o perdere il colore.
Come compagno del Kit \"A\", il Kit \"B\" viene fornito anche in una pratica scatola di plastica trasparente. Ogni numero di mirino è nella propria scatola chiaramente identificata su un vassoio nero. Ci sono 10 mirini di ciascun numero, per un totale di 80 nuovi mirini. Da solo, un inventario completo di 3 dimensioni molto popolari in 2 colori, con gambi da 6-48 e 8-40; ma come compagno del Kit \"A\", un assortimento imbattibile dei mirini per fucile più versatili e utili disponibili ovunque. E, proprio a portata di mano, pronti per essere installati per i tuoi clienti. Ordina oggi il tuo Kit di Mirini per Fucile \"B\" di Brownells.
Mirini di Ricarica per il Kit \"B\" - Ricariche per il Kit di Mirini per Fucile \"B\" sono disponibili singolarmente o in pacchetti da 10 mirini di un solo numero.
SPECIFICHE: Mirini in ottone e acciaio inossidabile in scatola di plastica trasparente da 3½\" (8.9cm) x 7\" (17.9cm).