Brownells Shotgun Sight Kit “B” is the most important improvement in the replacement shotgun sight field since the introduc-tion of the original Brownells Shotgun Sight Kit nearly 20 years ago. The new Kit is truly the natural and logical companion to the original Kit “A” - giving you, the gunsmithing or sports shop, all the sights that Kit “A” doesn’t contain, but that you need to have a really versatile and complete replacement shotgun sight inventory in just 2 small boxes. Plus, in Kit “B”, we took the practical step of making the White beads out of stainless steel. Stainless is stronger, won’t crush or distort when the beads are installed, does not have to be removed when the gun goes into the hot bluing solution (and won’t dissolve and ruin your bluing bath once it’s in there)!! Plus, the stainless won’t break off at the top of the shank, stays shiny forever, stands up to tougher use in the field, and generally is one whale of a lot better sight.But, the real advantage of Kit “B” is that by combining it with Kit “A”, you can now have a selection of shank sizes unequaled among shotgun sights. So, if you get a gun in your shop with a badly misshapen, worn or stripped-out sight hole, you will have a bead of exactly the same size, but with a shank one size larger. Replacement is then just a simple matter of drilling out the hole to the next size larger, tapping, and inserting the new bead. The most important thing is that the Kit saves you time, giving faster work turnaround in the shop, which makes you more money. It also eliminates “patching-up” the original hole (which often then requires repairing the blue, too) and redrilling and tapping for the original size shank. And, it gets your customer back in the field sooner which makes him happy, and makes you look good! Like the original Kit “A”, the workmanship is superb, the sight globes are true spheres, the threads are cut onto the shank, so they are clean, sharp, and give the best possible fit. And, they are threaded right up to the base of the bead so you can set the sight exactly onto the barrel.Thread sizes are 6-48 and 8-40; certainly two of the most common and popular thread sizes in the gun industry, so everyone has the necessary drills and taps. The bead sizes are .067, .130 and .175, again the most popular sizes, and the same as those used in Kit “A”.The Gold beads are machined from finest brass; the White beads from tough stainless steel. Because these are solid metal beads, they cannot bleed, chip, peel or have the color wear off.As the companion to Kit “A”, Kit “B” also comes in a clear plastic counter case. Each individual sight number is in its own clearly identified box on a black tray. There are 10 sights of each number, giving you a total of 80 new sights. By itself, a complete inventory of 3 very popular sizes in 2 colors, with 6-48 and 8-40 shanks; but as a companion to Kit “A”, an unbeatable assortment of the most versatile and useful shotgun sight beads available anywhere. And, right at your fingertips, ready to install for your customers. Order your Brownells Shotgun Sight Kit “B” today.Refill Sights for Kit "B" - Refills for the Shotgun Sight Kit “B” are single or 10-pak of sights of one number.
SPECS: Brass and Stainless Steel Beads in 3½" (8.9cm) x 7" (17.9cm) clear plastic box.
Other Shotgun Sight Kits:
SHOTGUN SIGHT KIT "B" CONTAINS: | NO. | HEAD DIA. | SHAFT/ THREAD | DRILL/TAP SIZE | COLOR |
| 21 | .067" | 6-48 | No. 31-6-48 | Gold |
| 22 | .130" | 6-48 | No. 31-6-48 | Gold |
| 23 | .130" | 8-40 | No. 28-8-40 | Gold |
| 24 | .175" | 8-40 | No. 28-8-40 | Gold |
| 25 | .067" | 6-48 | No. 31-6-48 | White |
| 26 | .130" | 6-48 | No. 31-6-48 | White |
| 27 | .130" | 8-40 | No. 28-8-40 | White |
| 28 | .175" | 8-40 | No. 28-8-40 | White |
Scopri il Kit di Mirini per Fucile \"B\" di Brownells!
Il Kit di Mirini per Fucile \"B\" di Brownells rappresenta un miglioramento fondamentale nel campo dei mirini di ricambio per fucili, da quando è stato introdotto il primo Kit di Mirini per Fucile di Brownells quasi 20 anni fa. Questo nuovo kit è il compagno naturale e logico del Kit \"A\", offrendo a te, armiere o negozio di articoli sportivi, tutti i mirini che il Kit \"A\" non contiene, ma di cui hai bisogno per avere un inventario di mirini di ricambio davvero versatile e completo, il tutto in sole 2 piccole scatole.
Inoltre, nel Kit \"B\", abbiamo preso la decisione pratica di realizzare le perle bianche in acciaio inossidabile. L'acciaio inossidabile è più resistente, non si schiaccia né si deforma quando le perle sono installate, non deve essere rimosso quando l'arma viene immersa nella soluzione di bluing caldo (e non si dissolve e rovina il tuo bagno di bluing una volta dentro)! Inoltre, l'acciaio inossidabile non si rompe all'estremità del gambo, rimane lucido per sempre, resiste a un uso più intenso sul campo e, in generale, è un mirino di gran lunga migliore.
Il vero vantaggio del Kit \"B\" è che, combinandolo con il Kit \"A\", ora puoi avere una selezione di dimensioni del gambo senza pari tra i mirini per fucili. Se ricevi un'arma nel tuo negozio con un foro per mirino malformato, usurato o filettato, avrai una perla della stessa dimensione, ma con un gambo di una dimensione maggiore. La sostituzione è quindi una questione semplice di allargare il foro alla dimensione successiva, filettare e inserire la nuova perla.
La cosa più importante è che il Kit ti fa risparmiare tempo, offrendo un turnaround di lavoro più rapido nel negozio, il che ti fa guadagnare di più. Elimina anche la necessità di \"riparare\" il foro originale (che spesso richiede anche di riparare il bluing) e di rifilettare per la dimensione originale del gambo. E, fa tornare il tuo cliente sul campo più rapidamente, rendendolo felice e facendoti apparire bene!
Come il Kit \"A\" originale, la lavorazione è superba, le sfere dei mirini sono vere sfere, le filettature sono tagliate sul gambo, quindi sono pulite, affilate e offrono la migliore vestibilità possibile. Le dimensioni delle filettature sono 6-48 e 8-40; certamente due delle dimensioni di filettatura più comuni e popolari nel settore delle armi, quindi tutti hanno i trapani e le filettature necessarie. Le dimensioni delle perle sono .067, .130 e .175, nuovamente le dimensioni più popolari, e le stesse di quelle utilizzate nel Kit \"A\".
Le perle dorate sono lavorate in ottone di alta qualità; le perle bianche in acciaio inossidabile resistente. Poiché queste sono perle di metallo solido, non possono sbiadire, scheggiarsi, sfaldarsi o perdere colore.
Come compagno del Kit \"A\", il Kit \"B\" viene fornito anche in una chiara custodia in plastica. Ogni numero di mirino individuale è nella propria scatola chiaramente identificata su un vassoio nero. Ci sono 10 mirini di ciascun numero, per un totale di 80 nuovi mirini. Da solo, un inventario completo di 3 dimensioni molto popolari in 2 colori, con gambo 6-48 e 8-40; ma come compagno del Kit \"A\", un assortimento imbattibile delle perle per mirini più versatili e utili disponibili ovunque. E, a portata di mano, pronte per essere installate per i tuoi clienti. Ordina oggi il tuo Kit di Mirini per Fucile \"B\" di Brownells.
Ricariche per il Kit \"B\" - Le ricariche per il Kit di Mirini per Fucile \"B\" sono disponibili in singolo o in confezione da 10 perle dello stesso numero.
SPECS: Perle in ottone e acciaio inossidabile in scatola di plastica trasparente di 3½\" (8.9cm) x 7\" (17.9cm).