Brownells Shotgun Sight Kit “B” is the most important improvement in the replacement shotgun sight field since the introduc-tion of the original Brownells Shotgun Sight Kit nearly 20 years ago. The new Kit is truly the natural and logical companion to the original Kit “A” - giving you, the gunsmithing or sports shop, all the sights that Kit “A” doesn’t contain, but that you need to have a really versatile and complete replacement shotgun sight inventory in just 2 small boxes. Plus, in Kit “B”, we took the practical step of making the White beads out of stainless steel. Stainless is stronger, won’t crush or distort when the beads are installed, does not have to be removed when the gun goes into the hot bluing solution (and won’t dissolve and ruin your bluing bath once it’s in there)!! Plus, the stainless won’t break off at the top of the shank, stays shiny forever, stands up to tougher use in the field, and generally is one whale of a lot better sight.But, the real advantage of Kit “B” is that by combining it with Kit “A”, you can now have a selection of shank sizes unequaled among shotgun sights. So, if you get a gun in your shop with a badly misshapen, worn or stripped-out sight hole, you will have a bead of exactly the same size, but with a shank one size larger. Replacement is then just a simple matter of drilling out the hole to the next size larger, tapping, and inserting the new bead. The most important thing is that the Kit saves you time, giving faster work turnaround in the shop, which makes you more money. It also eliminates “patching-up” the original hole (which often then requires repairing the blue, too) and redrilling and tapping for the original size shank. And, it gets your customer back in the field sooner which makes him happy, and makes you look good! Like the original Kit “A”, the workmanship is superb, the sight globes are true spheres, the threads are cut onto the shank, so they are clean, sharp, and give the best possible fit. And, they are threaded right up to the base of the bead so you can set the sight exactly onto the barrel.Thread sizes are 6-48 and 8-40; certainly two of the most common and popular thread sizes in the gun industry, so everyone has the necessary drills and taps. The bead sizes are .067, .130 and .175, again the most popular sizes, and the same as those used in Kit “A”.The Gold beads are machined from finest brass; the White beads from tough stainless steel. Because these are solid metal beads, they cannot bleed, chip, peel or have the color wear off.As the companion to Kit “A”, Kit “B” also comes in a clear plastic counter case. Each individual sight number is in its own clearly identified box on a black tray. There are 10 sights of each number, giving you a total of 80 new sights. By itself, a complete inventory of 3 very popular sizes in 2 colors, with 6-48 and 8-40 shanks; but as a companion to Kit “A”, an unbeatable assortment of the most versatile and useful shotgun sight beads available anywhere. And, right at your fingertips, ready to install for your customers. Order your Brownells Shotgun Sight Kit “B” today.Refill Sights for Kit "B" - Refills for the Shotgun Sight Kit “B” are single or 10-pak of sights of one number.
SPECS: Brass and Stainless Steel Beads in 3½" (8.9cm) x 7" (17.9cm) clear plastic box.
Other Shotgun Sight Kits:
SHOTGUN SIGHT KIT "B" CONTAINS: | NO. | HEAD DIA. | SHAFT/ THREAD | DRILL/TAP SIZE | COLOR |
| 21 | .067" | 6-48 | No. 31-6-48 | Gold |
| 22 | .130" | 6-48 | No. 31-6-48 | Gold |
| 23 | .130" | 8-40 | No. 28-8-40 | Gold |
| 24 | .175" | 8-40 | No. 28-8-40 | Gold |
| 25 | .067" | 6-48 | No. 31-6-48 | White |
| 26 | .130" | 6-48 | No. 31-6-48 | White |
| 27 | .130" | 8-40 | No. 28-8-40 | White |
| 28 | .175" | 8-40 | No. 28-8-40 | White |
Kit di Mirini per Fucile "B" - Un'ottima scelta per ogni gunsmith!
Il Kit di Mirini per Fucile “B” di Brownells rappresenta il miglioramento più significativo nel campo dei mirini sostitutivi per fucili da caccia dall'introduzione del Kit originale di Brownells quasi 20 anni fa. Questo nuovo kit è il compagno naturale e logico del Kit originale “A”, fornendoti, il gunsmith o il negozio di articoli sportivi, tutti i mirini che il Kit “A” non contiene, ma di cui hai bisogno per avere un inventario di mirini sostitutivi per fucili veramente versatile e completo, il tutto in sole 2 piccole scatole.
Inoltre, nel Kit “B”, abbiamo fatto un passo pratico realizzando le palline bianche in acciaio inossidabile. L'acciaio inossidabile è più resistente, non si schiaccia né si deforma quando le palline vengono installate, non deve essere rimosso quando l'arma viene immersa nella soluzione di bluatura calda (e non si scioglie né rovina il tuo bagno di bluatura una volta dentro)!! Inoltre, l'acciaio inossidabile non si rompe alla sommità del gambo, rimane lucido per sempre, resiste all'uso più intenso sul campo e, in generale, è un mirino molto migliore.
Il vero vantaggio del Kit “B” è che combinandolo con il Kit “A”, ora puoi avere una selezione di dimensioni del gambo senza pari tra i mirini per fucili. Quindi, se ricevi un'arma nel tuo negozio con un foro per mirino malformato, usurato o danneggiato, avrai una pallina della stessa dimensione, ma con un gambo di una dimensione maggiore. La sostituzione è quindi una questione semplice di forare il foro alla dimensione successiva, filettare e inserire la nuova pallina.
La cosa più importante è che il Kit ti fa risparmiare tempo, garantendo un rapido turnaround nel lavoro in negozio, il che ti fa guadagnare di più. Elimina anche il "rattoppare" il foro originale (che spesso richiede anche di riparare la bluatura) e il rifilettare per la dimensione originale del gambo. E, fa tornare il tuo cliente sul campo prima, il che lo rende felice e fa apparire bene te!
Come il Kit originale “A”, la lavorazione è superba, le sfere dei mirini sono vere sfere, le filettature sono tagliate sul gambo, quindi sono pulite, affilate e offrono la migliore vestibilità possibile. Inoltre, sono filettate fino alla base della pallina, così puoi posizionare il mirino esattamente sul barile. Le dimensioni delle filettature sono 6-48 e 8-40; certamente due delle dimensioni di filettatura più comuni e popolari nel settore delle armi, quindi tutti hanno i trapani e le filettature necessarie.
Le dimensioni delle palline sono .067, .130 e .175, di nuovo le dimensioni più popolari, e le stesse utilizzate nel Kit “A”. Le palline dorate sono lavorate dal miglior ottone; le palline bianche sono in acciaio inossidabile resistente. Poiché queste sono palline di metallo solido, non possono sanguinare, scheggiarsi, sfaldarsi o perdere colore.
Come compagno del Kit “A”, il Kit “B” viene fornito anche in una chiara scatola di plastica. Ogni numero di mirino individuale è nella propria scatola chiaramente identificata su un vassoio nero. Ci sono 10 mirini di ciascun numero, per un totale di 80 nuovi mirini. Da solo, un inventario completo di 3 dimensioni molto popolari in 2 colori, con gambi 6-48 e 8-40; ma come compagno del Kit “A”, un assortimento imbattibile delle palline per mirini per fucili più versatili e utili disponibili ovunque. E, a portata di mano, pronte per essere installate per i tuoi clienti. Ordina oggi il tuo Kit di Mirini per Fucile “B” di Brownells.
Mirini di Ricarica per Kit "B"
Le ricariche per il Kit di Mirini “B” sono disponibili in singole unità o in confezioni da 10 di mirini dello stesso numero.
SPECIFICHE: Palline in ottone e acciaio inossidabile in scatola di plastica trasparente di 3½" (8.9cm) x 7" (17.9cm).