EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: Desert Eagle Post 2017 Baby Desert Eagle Post 2006 Please take note to the Pre 2017 and Post 2017 differences when placing your order. Pre 2017 rear shelf behind the dovetail is .187" Post 2017 rear shelf behind the dovetail is .120"
Perfekte Montage für deine Desert Eagle!
Der DESERT EAGLE PRE 2017 LEUPOLD DELTAPOINT PRO SIGHT MOUNT von EGW ist die ideale Lösung, um dein Leupold DeltaPoint Pro, JPoint, Redfield Accelerator oder Optima Rotpunktvisier sicher zu montieren.
Produktbeschreibung
Die EGW Rotpunktvisiere sind so konzipiert, dass sie von links nach rechts installiert werden (mit dem Lauf nach vorne gerichtet). Der Schwalbenschwanz hat eine progressive Verjüngung, die die Installation erleichtert.
- Entferne das hintere Visier deiner Waffe.
- Installiere die EGW Sight Mount im Schwalbenschwanz.
- Ziehe die Setschraube (sofern zutreffend) fest.
- Setze das Rotpunktvisier auf die EGW Sight Mount (ein kleines Stück Papier zwischen dem Rotpunktvisier und der Montage erleichtert die Entfernung und hält Loctite vom Rotpunktvisier fern).
- Trage blauen Loctite auf die mitgelieferten Montageschrauben auf.
- Ziehe die Montageschrauben mit 15 in/lbs an.
Bitte beachte, dass eine Modifikation deiner Feuerwaffe die Herstellergarantie ungültig machen kann. Dieses Produkt sollte von einem qualifizierten Büchsenmacher installiert und überprüft werden. Es wird keine Haftung für Schäden oder Verletzungen übernommen, die durch unsachgemässe Installation oder Verwendung dieses Produkts entstehen können.
Hinweis
Diese Montage passt nicht für:
- Desert Eagle Post 2017
- Baby Desert Eagle Post 2006
Achte beim Bestellen auf die Unterschiede zwischen Pre 2017 und Post 2017:
- Pre 2017: Hinterer Regal hinter dem Schwalbenschwanz ist .187"
- Post 2017: Hinterer Regal hinter dem Schwalbenschwanz ist .120"