Brownells Shotgun Sight Kit “B” is the most important improvement in the replacement shotgun sight field since the introduc-tion of the original Brownells Shotgun Sight Kit nearly 20 years ago. The new Kit is truly the natural and logical companion to the original Kit “A” - giving you, the gunsmithing or sports shop, all the sights that Kit “A” doesn’t contain, but that you need to have a really versatile and complete replacement shotgun sight inventory in just 2 small boxes. Plus, in Kit “B”, we took the practical step of making the White beads out of stainless steel. Stainless is stronger, won’t crush or distort when the beads are installed, does not have to be removed when the gun goes into the hot bluing solution (and won’t dissolve and ruin your bluing bath once it’s in there)!! Plus, the stainless won’t break off at the top of the shank, stays shiny forever, stands up to tougher use in the field, and generally is one whale of a lot better sight.But, the real advantage of Kit “B” is that by combining it with Kit “A”, you can now have a selection of shank sizes unequaled among shotgun sights. So, if you get a gun in your shop with a badly misshapen, worn or stripped-out sight hole, you will have a bead of exactly the same size, but with a shank one size larger. Replacement is then just a simple matter of drilling out the hole to the next size larger, tapping, and inserting the new bead. The most important thing is that the Kit saves you time, giving faster work turnaround in the shop, which makes you more money. It also eliminates “patching-up” the original hole (which often then requires repairing the blue, too) and redrilling and tapping for the original size shank. And, it gets your customer back in the field sooner which makes him happy, and makes you look good! Like the original Kit “A”, the workmanship is superb, the sight globes are true spheres, the threads are cut onto the shank, so they are clean, sharp, and give the best possible fit. And, they are threaded right up to the base of the bead so you can set the sight exactly onto the barrel.Thread sizes are 6-48 and 8-40; certainly two of the most common and popular thread sizes in the gun industry, so everyone has the necessary drills and taps. The bead sizes are .067, .130 and .175, again the most popular sizes, and the same as those used in Kit “A”.The Gold beads are machined from finest brass; the White beads from tough stainless steel. Because these are solid metal beads, they cannot bleed, chip, peel or have the color wear off.As the companion to Kit “A”, Kit “B” also comes in a clear plastic counter case. Each individual sight number is in its own clearly identified box on a black tray. There are 10 sights of each number, giving you a total of 80 new sights. By itself, a complete inventory of 3 very popular sizes in 2 colors, with 6-48 and 8-40 shanks; but as a companion to Kit “A”, an unbeatable assortment of the most versatile and useful shotgun sight beads available anywhere. And, right at your fingertips, ready to install for your customers. Order your Brownells Shotgun Sight Kit “B” today.Refill Sights for Kit "B" - Refills for the Shotgun Sight Kit “B” are single or 10-pak of sights of one number.
SPECS: Brass and Stainless Steel Beads in 3½" (8.9cm) x 7" (17.9cm) clear plastic box.
Other Shotgun Sight Kits:
SHOTGUN SIGHT KIT "B" CONTAINS: | NO. | HEAD DIA. | SHAFT/ THREAD | DRILL/TAP SIZE | COLOR |
| 21 | .067" | 6-48 | No. 31-6-48 | Gold |
| 22 | .130" | 6-48 | No. 31-6-48 | Gold |
| 23 | .130" | 8-40 | No. 28-8-40 | Gold |
| 24 | .175" | 8-40 | No. 28-8-40 | Gold |
| 25 | .067" | 6-48 | No. 31-6-48 | White |
| 26 | .130" | 6-48 | No. 31-6-48 | White |
| 27 | .130" | 8-40 | No. 28-8-40 | White |
| 28 | .175" | 8-40 | No. 28-8-40 | White |
Kit di mirini per fucili a pompa di Brownells: precisione e versatilità!
Il Brownells Shotgun Sight Kit “B” rappresenta un miglioramento fondamentale nel campo dei mirini sostitutivi per fucili a pompa, da quando è stato introdotto il primo kit Brownells quasi 20 anni fa. Questo nuovo kit è il compagno naturale e logico del kit originale “A”, fornendo ai gunsmith e ai negozi di articoli sportivi tutti i mirini che il kit “A” non contiene, ma di cui hai bisogno per avere un inventario di mirini per fucili a pompa davvero versatile e completo, il tutto in sole 2 piccole scatole.
Inoltre, nel kit “B”, abbiamo preso la decisione pratica di realizzare i mirini bianchi in acciaio inossidabile. L'acciaio inossidabile è più resistente, non si schiaccia né si deforma quando i mirini vengono installati, e non deve essere rimosso quando l'arma viene immersa nella soluzione di bluatura calda (e non si dissolve, rovinando il tuo bagno di bluatura una volta immerso)!! Inoltre, l'acciaio inossidabile non si rompe nella parte superiore del gambo, rimane lucido per sempre, resiste a un uso più intenso sul campo e, in generale, è un mirino di gran lunga migliore.
Il vero vantaggio del kit “B” è che, combinandolo con il kit “A”, puoi ora avere una selezione di dimensioni dei gambi senza pari tra i mirini per fucili a pompa. Se ricevi un'arma nel tuo negozio con un foro per mirino malformato, usurato o filettato, avrai un mirino della stessa dimensione, ma con un gambo di una dimensione maggiore. La sostituzione è quindi solo una questione semplice di forare il foro alla dimensione successiva, filettare e inserire il nuovo mirino.
La cosa più importante è che il kit ti fa risparmiare tempo, dando un giro di lavoro più veloce nel negozio, il che ti fa guadagnare di più. Elimina anche il “ripristino” del foro originale (che spesso richiede anche la riparazione della bluatura) e il riforatura e filettatura per il gambo di dimensione originale. E, fa tornare il tuo cliente sul campo prima, il che lo rende felice e fa apparire bene te!
Come il kit originale “A”, la lavorazione è superba, le sfere dei mirini sono vere sfere, i filetti sono tagliati sul gambo, quindi sono puliti, affilati e offrono la migliore vestibilità possibile. Inoltre, i filetti sono presenti fino alla base del mirino, così puoi posizionare il mirino esattamente sul barilotto.
- Dimensioni dei filetti: 6-48 e 8-40; certamente due delle dimensioni di filettatura più comuni e popolari nell'industria delle armi, quindi tutti hanno i trapani e i filetti necessari.
- Dimensioni dei mirini: .067, .130 e .175, di nuovo le dimensioni più popolari, e le stesse utilizzate nel kit “A”.
I mirini dorati sono lavorati in ottone di alta qualità; i mirini bianchi in acciaio inossidabile resistente. Poiché questi sono mirini in metallo solido, non possono scolorire, scheggiarsi, sfaldarsi o perdere colore.
Come compagno del kit “A”, il kit “B” viene fornito anche in una chiara custodia di plastica. Ogni numero di mirino è nella propria scatola chiaramente identificata su un vassoio nero. Ci sono 10 mirini di ciascun numero, per un totale di 80 nuovi mirini. Da solo, un inventario completo di 3 dimensioni molto popolari in 2 colori, con gambi da 6-48 e 8-40; ma come compagno del kit “A”, un assortimento imbattibile dei mirini per fucili a pompa più versatili e utili disponibili ovunque. E, a portata di mano, pronti per essere installati per i tuoi clienti.
Ordina oggi il tuo Brownells Shotgun Sight Kit “B”!
Mirini di ricarica per il Kit “B” - Le ricariche per il kit di mirini per fucili a pompa “B” sono disponibili singolarmente o in confezione da 10 di mirini dello stesso numero.
SPECS: Mirini in ottone e acciaio inossidabile in scatola di plastica trasparente da 3½\" (8.9cm) x 7\" (17.9cm).